Results 1 to 7 of 7

Thread: Handlebar power plug, my last needed modification

  1. #1
    Senior Member bicyclenut's Avatar
    Join Date
    Jun 2016
    Location
    Chicago Suburbs, IL
    Posts
    180

    Handlebar power plug, my last needed modification

    Finishing up adding a 2port USB power outlet to the handlebar center cover. Purchased an extra cover in case I screwed it up and so I could put back to OEM look if needed. Cut out opening with Dremel tool and mounted port. Purchased plug and harness (see white connector with red shrink wrap in photo) for BMW GPS power outlet located under cover and added auto quick connects- one will power USB port and other GPS or could add other power accessory in future. Since I didn't have matching paint for the cover I had to paint the area for the mount modification black to match the power port. Port is weather resistant and has a cap and they can be found on Amazon or eBay. Will be used to power my mobile phone, Sat. locator or other USB devices with low power draw.

    Click image for larger version. 

Name:	IMG_3284.JPG 
Views:	150 
Size:	98.8 KB 
ID:	1719Click image for larger version. 

Name:	IMG_3285.JPG 
Views:	152 
Size:	82.7 KB 
ID:	1720Click image for larger version. 

Name:	IMG_3286.JPG 
Views:	153 
Size:	118.9 KB 
ID:	1721

  2. #2
    Nice installation.

  3. #3
    Senior Member bicyclenut's Avatar
    Join Date
    Jun 2016
    Location
    Chicago Suburbs, IL
    Posts
    180
    So I had installed this power plug in the center handlebar cover to power my phone and other handlebar mounted devices. I had used the pre-wired plug for the NAV option to power both my BMW NavV and this plug. I liked the final outcome as it almost looked like a stock installation and it worked great. Nice to have a plug for my phone, SAT tracker or camera handy and no interference with cords coming out of glove box. However, my installation was pretty permanent and I didn't take into account what I would need to do if the plug failed. Well, recently one of the USB ports failed to work (saw some reviews on Amazon that mentioned this the other day). To replace mine I'll pretty much need to cut it out or break it off due to way I mounted it with plastic epoxy.

    Old plug:
    Click image for larger version. 

Name:	IMG_9561.jpg 
Views:	32 
Size:	15.1 KB 
ID:	2182
    Click image for larger version. 

Name:	IMG_9562.jpg 
Views:	29 
Size:	11.5 KB 
ID:	2183

    New solution was to buy a round "bolt in" USB plug, also available as cigarette lighter type power plugs. All this required was to drill a hole large enough and then bolt this in place and attach connectors from power lead. If the plug fails, it can easily be swapped out with a new one. Not sure why I didn't do it this way before, as it was much easier and less time, just drill the hole and mount. The old one had a nice look but required cutting, mounting, epoxy, shaping and sanding and painting over several days. The round plug method took less than an hour.

    New plug:
    Click image for larger version. 

Name:	IMG_9563.jpg 
Views:	37 
Size:	10.8 KB 
ID:	2184
    Click image for larger version. 

Name:	IMG_9564.jpg 
Views:	33 
Size:	14.1 KB 
ID:	2185

    The additional holes are for the NavV factory mount from BMW to allow attachment to handlebar.
    2014 C650GT Quartz Blue Metallic

  4. #4
    I bought an additional cover like that so I could mount my GPS bracket. Worked very well but now I'm using my phone GPS so will have to change the mount. I'll attach the new phone mount to the cover that had my GPS bracket. I'll also install a phone charging socket on the cover as well so the phone will stay fully charged. It's very handy having the phone mounted there, I have Bluetooth in my helmet so I can make and receive calls hands free when I'm on the bike as well as listen to the GPS lady.
    2013 C650GT 1994 K1100LT

  5. #5
    Your last needed mod is cruise control. Hey BMW, ARE YOU LISTENING, ”BUILD IT AND THEY WILL BUY IT.”

  6. #6
    Senior Member bicyclenut's Avatar
    Join Date
    Jun 2016
    Location
    Chicago Suburbs, IL
    Posts
    180
    I have a KAOKO throttle lock but I agree, electronic cruise control would be great.

    Quote Originally Posted by Sparkrn View Post
    Your last needed mod is cruise control. Hey BMW, ARE YOU LISTENING, ”BUILD IT AND THEY WILL BUY IT.”
    2014 C650GT Quartz Blue Metallic

  7. #7
    Bicyclenut ...
    Well done! Nice job ... Smart!
    2016 C650 GT in Custom Ruby Red Metallic CC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •