Installing BMW GPS Mounting Bracket Hardware and BMW Navigator VI/Cradle on 2016 and later C650GT

jimdillard

New member
Good Morning Folks,

I recently bought a 2019 BMW C650GT Maxi-Scooter in Franklin, TN, USA and I’d like to install the BMW GPS Mounting Bracket Hardware and BMW Navigator VI/Cradle which I ordered from Max BMW. I viewed several other discussions on GPS installation on the 2015 and earlier C650GT, however my issue is with the black plastic plate on the top of the steering tree where the BMW GPS mounting bracket hardware is to be installed. The 2015 and earlier models of the C650GT had a silver-colored plastic plate on the top of the steering tree that was attached with a single hex screw, and easily removed accordingly. Unfortunately, the 2016 and later C650GT has a black plastic cover that has NO visible screw(still), top or bottom, to remove it during installation of the GPS GPS mounting bracket hardware. I’ve ordered a BMW shop manual DVD, however, it won’t arrive for at least a few weeks.

Has anybody removed the black plastic cover on top of the steering tree on a 2016 or later C650GT? If so, could you please tell me how you removed it without damaging the cover? Also, if anybody has instructions and/or photos of the BMW GPS mounting bracket hardware installation on a 2016 or later C650GT could you please post them here?

I've attached a photo of the black plastic steering tree cover below. Thanks very much for your assistance.

Ride Safe,
Jim
 

Attachments

  • IMG_5266.jpeg
    IMG_5266.jpeg
    224.1 KB · Views: 62

byee

Active member
Did you install the BMW GPS Prep kit or was it just the mount for the BMW Nav VI?
 

Delray

Well-known member
I have a 2019 GT, as well. Won't be near my Service Manual until this evening but I will take a look for instructions on removing it.

I'd guess it's like the BMW rondel at the rear of the bike between the passenger grips -- carefully pry it up until it pops out.

UPDATE: Service manual DVD only goes up to 2017 so it shows the older cover with a torx bolt. Sorry.
 
Last edited:

fluufy

New member
The entire black plastic cover pulls back towards the seat. The BMW NAV cradle is a real pain in the arse to fit - I ended up getting the dealer to do it at my next service. It is the only scooter work/mod that has ever stuffed me!
 

Dezeez

New member
Speaking of the BMW Nav unit, I just bought a 2013 C 650 with the GPS installed. Can BMW update this unit with new maps? Has anyone had it done and what did they charge to do it?

Thanks.
 

Macgt

New member
Anyone done a OEM looking installation for an Android phone not using the Motorrad cradle?
 

Cliff

New member
I Pick up a 2016 C650 GT on Wednesday and plan to install the Garmin 660 Sat Nav from my old bike. I will need to remove that central steering bar cover to find the switched power supply. Would be grateful if anyone has any pictures see what it looks like under there and how to identify the feed. Thanks.
 

jimdillard

New member
I added the BMW GPS mount a few years ago on my 2019 C650GT. Be VERY careful with the BMW mounting bracket. Secure it with a piece of string while installing it or some other safety feature that ensures it DOES NOT get dropped down in the the "black hole" of the scooters frame! Do NOT drop it in there! You may never find it. I know...LOL!

This forum is extremely restrictive regarding file size for attachments. Almost unusable really. I have a PDF of the BMW install procedures and several photos I took as I did the install. PM me your e-mail and I'll send them to you.

Cheers,
Jim
 

Eftan Dubh

New member
I added the BMW GPS mount a few years ago on my 2019 C650GT. Be VERY careful with the BMW mounting bracket. Secure it with a piece of string while installing it or some other safety feature that ensures it DOES NOT get dropped down in the the "black hole" of the scooters frame! Do NOT drop it in there! You may never find it. I know...LOL!

This forum is extremely restrictive regarding file size for attachments. Almost unusable really. I have a PDF of the BMW install procedures and several photos I took as I did the install. PM me your e-mail and I'll send them to you.

Cheers,
Jim
Please add me to the how to, want my Zumo xt to work on c 650 gt
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock
No Thanks