Search results

Please refer to the attached photo for connecter. BMW Motorrad also sells the end which fits into connector. Sorry I don’t have the part number.

RobP, do you have a mount in mind for your XT? There is a power connector under the handle bar fairings you can use.

I should’ve waited! I bought the BMW Motorrad publication for $150CDN

YSS does have a front option but I wasn’t comfortable taking apart the front forks or worth paying BMW Motorrad to install…$275. Front kit only provides a compression adjustment. I may have considered if there was a compression and rebound adjustment. The stock front suspension works fine as...

Unfortunately you will encounter the same problem with the Hyperpro’s with the preload adjusters

I stand corrected, thx to wspollack!!! Hyperpro sells a kit which lowers tte front and rear by 25mm or 1 inch. https://www.webshop-hyperpro.com/en/motorbike/bmw/c-400-gt-x/c-400-gt-x/2018-2021/suspension/height-adjustment/lowering-kit-combi/SP-BM04-SSE003

When the shocks are mounted….the preload ring is located at the bottom. I’ve never had to adjust it. It may be difficult to adjust with the tommy bars provided because of the lack of space.

It’s common knowledge the speedos are incorrect. I have used apps such as speedometer to check speeds. It’s GPS driven but don’t know what the error margin is

Does the GS-911 allow the user to change the settings on the bike or is it more about reading & resetting codes?

I don't own a C400X so I will be providing you guidance. Step 1 - If you can, please remove 2 x screws labelled as #2. Based on the picture provided, the 2 x screws #2 may not be easily accessible. If this is the case, please remove the 4 x T25 screws holding the BMW GPS cradle. Please be...

…..thinking the GT designation should give us at least + 5kph than your C400X 😀

I’ve gotten my C400GT up at 141kph. Never thought of pushing it all the way nor did I realize I was a couple kph away for the top speed. I had no issues getting it up there either.

Michaelbarth, Welcome to bmw-scooters.com! Please include a photo of the cradle mounted on your C400X. I can walk you thru the removal process. Cradle is worth about $125 intact. Cutting the cable will pretty make it worthless.

Sorry for the delayed response. Busy working on the house. I soldered a 24 gauge wire to the outside leg of one of the fuses as a trigger. I then drilled a 1/16” hole into the fuse cover to run the wire out to trigger my PDU. I hope you found the info helpful

Which camera are you using to make the videos?

Anyone install the BMW GPS Prep Kit on their C400GT/X? I’m interested but my local dealership was not able to confirm. I also called BMW Motorrad Canada and they deferred me to the local dealership. I’m interested in buying the ConnectedRide cradle with required the BMW GPS prep kit...

Not certain if that will work. The seat is mid point for the C400GT. I’m thinking lowering the rear will have little impact on the seat height. There is a lower seat option directly from BMW which only lowers the seat from 775mm to 760mm or just under 5/8” inch Good luck!

It’s directly above the battery

1) Did you use the brake lines as attachment guides for the wires from your added lights? And I've had the front tupperware off once, but I wasn't paying attention to that area: where do the lines wind up, as they enter the dash area? I did zap strapped the wires to brake lines at the front of...

I’ve added Ridgid Ignites to my C400GT - spots and floods. I made my own power distribution unit (PDU) using a waterproof Panasonic relay which gets triggered when the bike is running. I chose the Panasonic relay because of its size vs Bosch. Here’s the relay I bought...