• Welcome to the BMW Scooter Forums. Member registration disables ads and allows you to post and share. Register Here.

Service reseting

V

vade2ne

New member
Joined
Dec 10, 2023
Messages
5
Location
paris
Visit site
Hi guys,
is there any chance to reset the "service message" by myself after doing the oil and filter change by myself ?
Maybe a sequence buttons ???
Thanks for your help.
 
vade2ne said:
Hi guys,
is there any chance to reset the "service message" by myself after doing the oil and filter change by myself ?
Maybe a sequence buttons ???
Thanks for your help.
Click to expand...
I think you have to buy one of those code-reader/resetter devices. There are some threads here about that, but in the 600/650 section only, as I recall.

No magic button-push sequences that I’ve heard of.
 
wspollack said:
I think you have to buy one of those code-reader/resetter devices. There are some threads here about that, but in the 600/650 section only, as I recall.

No magic button-push sequences that I’ve heard of.
Click to expand...
Thanks, This was the answer I was hoping I wouldn't read. ;-)))
 
I thought I would post this link here because I think this is the same procedure on the C400gt. If it is not let me know and I will delete this. Note you do have to purchase an OBDLink LX and the Pro version of the Motoscan App.

 
Yes the service reminder message should disappear upon an off/on recycle. If it doesn't, I suggest trying again and making sure you set the new service date into the future and the mileage at which the bike should remind you it's time for service again.
 
Ceesie76 said:
Yes the service reminder message should disappear upon an off/on recycle. If it doesn't, I suggest trying again and making sure you set the new service date into the future and the mileage at which the bike should remind you it's time for service again.
Click to expand...
Thanks for your input. I did this several times. Did it again today. Bike time 17.3.2025, mileage 10,000, Future service 17.3.2026.
I tried starting a few times after that and the service reminder it is still there. I emailed WGSoft today with my procedures and asked what may be the problem?

Update:
They just left an email. They said not to change anything. I should tap through all 3 Reset buttons as they are and it should reset.
I will try again as I do not believe I tapped them all as the first one was set correctly.

PS: There was no crush washer on my oil drain plug when I changed my oil. Only a rubber gromet on the inside thread. Do others have a gromet? My original break in oil change was done buy the dealer so I don't know if they left it off or not but I have not lost any oil.

I have written up the comlete porcedure if anyone is interested.

Update:
This worked. Finally. To get my phone to connect via bluetooth was not easy. I had to Forget all the devices connected to bluetooth then restart my phone and pair only to the OBDLink LX. Once I did this everything went smoothly.
 
Last edited:
You must log in or register to reply here.
Back
Top