• Welcome to the BMW Scooter Forums. Member registration disables ads and allows you to post and share. Register Here.

Passenger Foot Pegs

TwoPort

TwoPort

Member
Joined
Aug 22, 2014
Messages
501
Location
Napa, California
www.californiaexitplan.com
My passenger is asking for an additional set of foot pegs for an alternate position that is a little higher. Seems like the best mount opportunity is the frame just below the seat. Looks like I could cut the plastic exterior for a perfect fit. I've looked at the Kuryakyn parts and I'm sure something will fit. I've thought about adding some highway pegs just to get my legs out a bit more in a relaxed position but it never rose to the "do it now" category.

Has anyone added additional foot pegs?
 
I also have briefly looked at this for my wife. Didn't look too hard but also didn't find a solution. I think floorboards insread of footpega for her would be great. Don't know what i would need though.

Sent from my SGH-M919 using Tapatalk
 
Kuryakyn has some good stuff. I've put their hiway pegs on three different Goldwings I've had and a BMW K1100LT. Their ERGO line is hard to beat. It seems to me that for a passenger it would be worthwhile to try some wood blocks on the passenger floorboards. It shouldn't be too hard to figure out a way to attach a block on each side. My making them out of 3/4 wood it would be easy to find the right height by adding a layer and having the back seater try different elevations of the blocks. It might be possible to screw the first 3/4" layer to the floorboard with a could screws and then use a couple screws to add each layer. That way even if you ended up with three layers of wood pads it would still be easy to remove them one layer at a time. The only snag to figure out would be to come up with a way to easily remove the left side pad so the oil can be checkeed and added.
 
You must log in or register to reply here.
Back
Top