Backrest feedback, Givi vs Shad

Luisimo

Luisimo

New member
Hi! New owner and super excited to learn about the scooter. After riding it home, I realized that I want to install a backrest right away.
After a quick search, found out that BMW doesn’t make one but Givi and Shad do.
Any advise on which one is best? Will appreciate pros and cons if you can share.


Excited new owner.
 
R

Riding Foo

New member
I'm a relatively new owner of a 2020 650 GT. Great bike. Wife was used to my RT 1250 top box as a back rest and wanted one for the Scooter.
I got the Shad and it works great. It was an easy install but you have to make two orders. One is for the mounting bracket and the other is for the backrest itself. (ask me how I found out about that 🤣). It was an easy install and took about 10 minutes. The only issue I had is that there is a cover that says "Shad" for where the backrest attaches to the mounting bracket. It didn't fit and I didn't want to screw it up. It's no problem however as it's all black there and nobody notices that it's missing.

My wife is a happy rider and I'd get it again.
 
Luisimo

Luisimo

New member
Riding Foo said:
I'm a relatively new owner of a 2020 650 GT. Great bike. Wife was used to my RT 1250 top box as a back rest and wanted one for the Scooter.
I got the Shad and it works great. It was an easy install but you have to make two orders. One is for the mounting bracket and the other is for the backrest itself. (ask me how I found out about that 🤣). It was an easy install and took about 10 minutes. The only issue I had is that there is a cover that says "Shad" for where the backrest attaches to the mounting bracket. It didn't fit and I didn't want to screw it up. It's no problem however as it's all black there and nobody notices that it's missing.

My wife is a happy rider and I'd get it again.
Click to expand...
Thank you for the reply. I was about to order one but I found out that they are off until next year. I am going to go with the Shad. Will post pictures when done.
 
Luisimo

Luisimo

New member
OK, is so awesome to have a forum to share and find out about a common hobby. I have learned a lot in the last few days.

I changed my mind about installing just a backrest, after seeing some posts from within the forum, I end up liking the following combo from SHAD

1. Top Mount (W0CE42)
2. Top Case SH39 (D0B39106)
3. Backrest Pad for SH39 Top Case (D0RI3900)

but then I saw within SHAD the following
1. Top Case TR48 (D0TR48100B)
2. Double Backrest Pad (D0RI75)

Unfortunately, it is not clear to me if Top Mount (W0CE42) will work with Top Case TR48 and SHAD is on Holidays until next year so I can get an answer until then.

Have anyone install this set up? Any feedback of something that I am missing?
 
Last edited:
Luisimo

Luisimo

New member
Quick Update, After talking with people from SHAD they informed me that Top Case TR48 will NOT fit the CE 04... Webpage was updated...

So I had to stick with the non square top cases :(

PLUS the Top Mount is in back order, so it will take a few weeks before it is delivered.
 
Luisimo

Luisimo

New member
Not sure if people care, but after placing the order with SHAD I was told that they were back ordered and it will take a couple/few weeks to get the parts. I end up cancelling the order and instead I went with Top Vario Case and the Wunderlich rear rack, got all the parts last week and will be installing them soon.
 
Fullum

Fullum

Member
Luisimo said:
Not sure if people care, but after placing the order with SHAD I was told that they were back ordered and it will take a couple/few weeks to get the parts. I end up cancelling the order and instead I went with Top Vario Case and the Wunderlich rear rack, got all the parts last week and will be installing them soon.
Click to expand...
Hi I had the same experience with ShadUSA for a order (Backrest) so I've order on MOTOBLOUZ French website really good fast delivery and competitive price even if it's in Euro.
I've order as well my Puig hi screen as well.
Cheer!
Yves
 
Luisimo

Luisimo

New member
Well, FOUR weeks after getting the scooter, I finally got the parts and found the time to put them together.

Top Box.jpg

I end up going for the Vario Top Box instead. To avoid losing the rear passenger I went with a Wunderlich rack. Sadly they are out of a crucial part so I had to get creative and used an additional adapter but if I don't mentioned it, you are not likely to notice it.

Just my luck, I will not be able to test it this weekend :sad

Weather.jpg
 
Fullum

Fullum

Member
Over here the bylaw is from the 1 december to March 15 you need snow tires on your vehicles but since it's freezing like well forget about it! I take the subway much relax.
But March 15 if the weather permit ! Beware I'm on the road!!!
 
J

jorgebri60

Member
a_shad12160_620x.jpg

I have this exact setup. Works great, install was easy. When I get home today I'll post a picture
 
J

jorgebri60

Member
Here you go!
 

Attachments

  • IMG_1789.JPEG
    IMG_1789.JPEG
    995.4 KB · Views: 15
  • IMG_1790.JPEG
    IMG_1790.JPEG
    907.7 KB · Views: 15
  • IMG_1791.JPEG
    IMG_1791.JPEG
    841.1 KB · Views: 16
  • IMG_1792.JPEG
    IMG_1792.JPEG
    847.2 KB · Views: 17
  • IMG_1793.JPEG
    IMG_1793.JPEG
    848.4 KB · Views: 16
  • IMG_1794.JPEG
    IMG_1794.JPEG
    876.2 KB · Views: 13
  • IMG_1795.JPEG
    IMG_1795.JPEG
    921 KB · Views: 14
HappyRican66

HappyRican66

New member
Luisimo said:
Well, FOUR weeks after getting the scooter, I finally got the parts and found the time to put them together.

View attachment 4346

I end up going for the Vario Top Box instead. To avoid losing the rear passenger I went with a Wunderlich rack. Sadly they are out of a crucial part so I had to get creative and used an additional adapter but if I don't mentioned it, you are not likely to notice it.

Just my luck, I will not be able to test it this weekend :sad

View attachment 4347
Click to expand...
can you post a picture of the bottom of the topcase? is it the same as the other Vario cases? I want to add one to my C400GT and was hoping it would fit the OEM rack
 
Luisimo

Luisimo

New member
HappyRican66 said:
can you post a picture of the bottom of the topcase? is it the same as the other Vario cases? I want to add one to my C400GT and was hoping it would fit the OEM rack
Click to expand...

It is NOT the same. IF you want to use the key barrel that you get when you purchased the motorcycle, you will need to get the TopCase specifically designed for the CE 04.

That said, I did NOT installed the specifically designed CE 04 TopCase!

I used the one from F800GS but I was able to do that because I also bought the Kit For Luggage Rack for the F800GS and was able to bolt it to the Wunderlich rack.
 
You must log in or register to reply here.
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock
No Thanks