According to the workshop manual, the chain guide with top jump guard is tightened to 10NM. Reaching the two screws in the recessed area was impossible with my torque wrench so those were done by feel. If you’ve gotten that far then you’re doing great!
According to the workshop manual, the chain guide with top jump guard is tightened to 10NM. Reaching the two screws in the recessed area was impossible with my torque wrench so those were done by feel. If you’ve gotten that far then you’re doing great!
It's good that you asked the question about the torque setting for the top jump guard fasteners for my November 28, 2022, post was in error when I stated that the torque setting should be 20NM. I rechecked my post and discovered the error which has now been corrected.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.