carlosabh71
New member
Hi! This weekend I just finished the project of fitting a pair of Nissin’s 3 pot calipers, I bought them on eBay , they’re oem on Honda’s CBF 600 Hornet motorcycles and are an almost plug and play job ( because of Honda combined brake system, left caliper use its center pot in a separate line that is connected to rear brake master cylinder) so for our use it is necessary to drill a small hole at the center of the base of cylinder that accomplishes connecting it to the others two hydraulic system making unnecessary using the second brake line , to finish it just need a plug on the leftover plug.
Total cost of the mod: Pair of new calipers with pads on eBay: about $150
And about performance: A LOT more braking power to stop our heavy rigs!!!
https://photos.app.goo.gl/MCfTqCPrP5cuu5MMA
https://photos.app.goo.gl/WHJqftNFVRqMA76T6
https://photos.app.goo.gl/w8euuwgSB1yvJ9Bt9
https://photos.app.goo.gl/GjBvgb9xdBzLaHSH9
https://photos.app.goo.gl/iEJdNadBkguW3KEv6
https://photos.app.goo.gl/us7TS5ai8Ui9tGv88
https://photos.app.goo.gl/WKkpENLaVXcU526A6
Total cost of the mod: Pair of new calipers with pads on eBay: about $150
And about performance: A LOT more braking power to stop our heavy rigs!!!
https://photos.app.goo.gl/MCfTqCPrP5cuu5MMA
https://photos.app.goo.gl/WHJqftNFVRqMA76T6
https://photos.app.goo.gl/w8euuwgSB1yvJ9Bt9
https://photos.app.goo.gl/GjBvgb9xdBzLaHSH9
https://photos.app.goo.gl/iEJdNadBkguW3KEv6
https://photos.app.goo.gl/us7TS5ai8Ui9tGv88
https://photos.app.goo.gl/WKkpENLaVXcU526A6
Last edited: