francisthepig
New member
Used the info here just to wire up my Shad brake light. Thanks.
TN_Sooner - it's probably late, but for the next person. There are two metal bolts on the inside of the storage bin and one black plastic one one the left hand side. (If you are standing on the left side of the bike looking down in the storage bin) This bolt was a little tricky because it is not like the other two. You have to back out the screw about 10 turns then use a screw driver to pry out the plastic base. Once these three bolts are out, the rear panel comes of really easy and expose all the wires you will be working with.
TN_Sooner - it's probably late, but for the next person. There are two metal bolts on the inside of the storage bin and one black plastic one one the left hand side. (If you are standing on the left side of the bike looking down in the storage bin) This bolt was a little tricky because it is not like the other two. You have to back out the screw about 10 turns then use a screw driver to pry out the plastic base. Once these three bolts are out, the rear panel comes of really easy and expose all the wires you will be working with.