• Welcome to the BMW Scooter Forums. Member registration disables ads and allows you to post and share. Register Here.

Carpuride Installed

Rugerbear

Member
Joined
Apr 28, 2025
Messages
56
Location
La Luz, New Mexico
Visit site
I finally got my Carpuride installed. And a garage door opener button. I had to take the top handle bar cover off, left side panel off, Windshield, and little cover under the windshield. I found the little 3 prong plug under the handle bar cover. I plugged the adapter I got from Amazon in. Hooked up the positive and negative leads. The third one is just folded back and taped it to the bundle. I ran the lead from the Carpuride from the plug into the space behind the little cover I took off under the windshield. I was able to feed it up to right at the bracket I was putting the Carpuride on. The cable is hidden with just the end that attaches to the Carpuride showing. I then took all the excess cable and coiled it up and zip tied it together and then to the wire loom that the plug was attached to. I left all the lead on the Carpuride. I guess I could have cut it shorter and put the fuse back in line. As it is, if I need to get to the fuse all I have to do is take the top handle bar cover off.


The unit had a bolt that went thru the mount on the back to tighten it on so it wouldn’t move. It had a end that reminded me of a wing nut. I thought very easy to remove. I replaced it with a socket cap head screw that took an Allen wrench to remove. I tightened it down real good and put a lock nut on the other end. It is very sturdy and I feel a little secure from easy removal.


I am able to see it real good because of the size, 7”. And also the speedometer. I have to lean to one side the see the info on the top of the display. Unfortunately I can’t use the vent in the windshield. Oh well. The 5” one was just too small to see real good and to control


I got the 702Pro. I connected the phone to it and then the helmet to it. The Carpuride controls everything.It evens has an equalizer in it.


I was also able to Bluetooth my phone to the Scooter and it shows what the speed limit is supposed to be where I am at.

I also put in a button to control a Garage Door Opener.
 

Attachments

  • IMG_0719.webp
    IMG_0719.webp
    872.2 KB · Views: 36
  • IMG_0720.webp
    IMG_0720.webp
    957.8 KB · Views: 35
  • IMG_0721.webp
    IMG_0721.webp
    667.4 KB · Views: 34
  • IMG_0722.webp
    IMG_0722.webp
    650.6 KB · Views: 34
  • IMG_0723.webp
    IMG_0723.webp
    606.6 KB · Views: 34
  • IMG_0725.webp
    IMG_0725.webp
    651.4 KB · Views: 33
  • IMG_0726.webp
    IMG_0726.webp
    894.9 KB · Views: 34
  • IMG_0728.webp
    IMG_0728.webp
    1.6 MB · Views: 34
  • IMG_0729.webp
    IMG_0729.webp
    716.7 KB · Views: 32
  • IMG_0734.webp
    IMG_0734.webp
    456.6 KB · Views: 35
This is a great post, what is your impression of the 702s you picked up so far? I've heard there is an issue with the mount where it can lose power to the screen periodically depending on road conditions.
 
Back
Top